GAZEBO ASSEMBLY INSTRUCTIONS
- Stand the frame up on its legs. Ensure this is the centre of the area you want to cover. With one person at each leg, slowly open the gazebo by lifting it off the ground slightly. This will ensure there is no damage to the frame’s feet. Keep checking that the reinforced fabric on the roof is above the centre piece and at each of the four corners (failure to do this will result in the roof being ripped!!)
- Engage the auto slider at each corner. This is done by pushing up with one hand while holding down on top of the leg with the other hand. You should hear a click from the ‘O’ ring, engaging with the hole. Repeat this on all other legs.
- At each corner, pull the hem of the canopy down to the bar. Secure the Velcro so the top is tight, with no sagging.
- Raise the gazebo to the desired height using the quick release pins.
- The sides can be attached using the Velcro fastening on the roof and wall. Use the Velcro tyings to attach it to the uprights.
- Taking down is simply the reverse, but make sure and undo the Velcro fastening from the roof to the top bar
IMPORTANT
There are some important things to take into consideration when using a gazebo.
Wind – If it is windy conditions, we recommend using stakes or weights to hold down the gazebo. If the wind becomes stronger, we recommend taking it down to avoid injury or damage.
Rain – Make sure the fabric is completely dry before packing it away. If it is wet, mildew may grow on the fabric.
This website is produced and managed by the Donaghadee Community Development Association, a charity based in Donaghadee (Registration No 103332) which is seeking to make Donaghadee a better place to live, to work and to visit.
Membership is open to anyone aged 18 or over who shares our vision. Local businesses and community-based organisations are particularly welcome. If you wish to join please complete the Contact Form on this page.
If you wish to promote your accommodation, business or event, please use the contact form on this page.